TRASH ANALIZER FOR COTTON

281C

Trash Analizer for Cotton

The equipment was designed for separating the fault and impurity contents of short and medium fibre cotton bales. The equipment can be used for the numerical weight-proportional and percentage determination of solid impurities in natural fibrous material samples, nops, motes leaf and stalk fragments in cotton samples. The intensive opening and separating capacity of the equipment enable the test sample to be separated into components, in a rapid procedure and with no subjective errors. The disintegration of the sample fed into the equipment takes place articulated feeding claws, split feeder and opening , blades, using negative-rake fixed opening cylinder , while the selection and separation are carried out, in mechanical way, by air blast splitter. Each carefully agglomerated component is to be weighed separately using an analytical balance. Also used to determine non-fibre content of synthetic fibres and to open and clean fibres for further testing. The analyser uses the carding principle with air separation of lint and non-lint content.

Kg 140

(L) 640 (P) 950 (H) 550 mm

380V 50 Hz Trifase/Three phase - Potenza/Power 750W