IMPACT ABRASION LAB
CODE
2563
MODEL
Impact Abrasion Lab
SPECIFICATIONS
Plexiglas protective cover with electromechanical opening control
- Auxiliary circuits for test start/end: 24V
- Power supply: three-phase 380V; installed power: 2.5 kW;
pneumatic supply: 5 bar (6 mm diameter hose)
- Test duration counter (in seconds and second tens) and abrasion
meter counter
- Selectable speed of abrasive tape: 8 m/sec (ISO 13595-2), 1.7 m/sec (ISO EN 14120)
- Known weight: 49 N; sample drop height: 50 mm
DESCRIPTION
Laboratory instrument built according to the ISO EN
13595-2 and ISO EN 14120 International Standards.
Conceived for:
. Determining quality of suits like jackets, trousers,
motorbikersuits (both one piece and detached),
gloves, etc, made to protect motorbikers from
injuries caused by impact against a road surface.a road surface.
· Determining the resistance to abrasion of
protective garments for wrists, hand palms,
knees and elbows, conceived for users of
sport wheelchairs (cycles, skateboards).
STANDARDS
ISO 13595-2,ISO EN 14120
WEIGHT
150 kg
DIMENSIONS
150x50x150 cm
POWER SUPPLY
three-phase 380V
PHOTOS
DEPLIANT
Select the product in 4 steps: