Fabrics » Colour fastness » To sunlight exposure » Xenon- Lab

XENON- LAB

Order this article
Printable version

CODE
325E
MODEL
Xenon- Lab
SPECIFICATIONS
•SORGENTE: 1500W xenon lamp, air cooled •UV FILTER: 310 nm filter, to simulate the indoor conditions •WETTING SYSTEM: high performances ultrasonic wetting device: low power consumption, high performances and long lasting reliable functioning. Close ring wetting circuit for low water consumption •CONTROL SYSTEM: dedicated control system allowing to: -set on the timer the testing duration and see on the display the left time to the test end -set, stabilize, and see the irradiance (expressed in W/m2 at 300-800 nm, or at 300-400 nm, at 340 nm, at 420 nm) -set, stabilize, and see the black standard temperature “BST” (or BPT) -set, stabilize, and see the test chamber relative humidity
DESCRIPTION
Xenon-Lab is a new equipment, developed to work following all the testing conditions indicated for the colour fastness assessement of goods tested with radiation of a lamp and with controlled moisture condition.
STANDARDS
ISO 105 BO2 BS 1006
WEIGHT
60 kg
DIMENSIONS
(L)800 X (P)450 X (H)1000mm
POWER SUPPLY
230 V 50/60 Hz
PHOTOS
 
DEPLIANT